Auger Not Turning On Traeger (2024)

1. Why Is My Traeger Pellet Grill Not Working? - GrillPartsReplacement

  • 3 apr 2023 · If not, the auger motor could have failed. The auger is responsible for feeding the pellets into the fire pot. Make sure that it is turning and ...

  • There could be several reasons why your Traeger Pellet Grill is not working. Traeger pellet grill uses a control panel to operate the pellet auger, hot rod ignitor and combustion fan. The control panel receives temperature information from inside the grill via the RTD sensor. Here are some troubleshooting steps that you can follow to identify and resolve the issue:    Check the Power Supply: Make sure that the grill is properly plugged in and that the outlet is working. You can try plugging in another appliance to see if the outlet is providing power.   Check the Pellet Hopper: Empty out all the pellets and vacuum out the hopper, auger and burn pot. Make sure they are not jammed. If there is a jam, try clearing it using a long tool like a broom handle.   Check the Auger: Listen to tell if the auger is working and moving pellets. If not, the auger motor could have failed. The auger is responsible for feeding the pellets into the fire pot. Make sure that it is turning and not clogged. If it is clogged, try cleaning it out.   Check the Fire Pot: Make sure that the Fire Pot is clean and free of debris. If it is dirty, try cleaning it out with a brush.   Check the Igniter: If the fire fails to start at all, the hot rod ignitor could have failed and may need replacing. Alternatively, the induction fan may be faulty.    Check the Temperature Probe: The temperature probe is responsible for reading the temperature inside the grill. Make sure that it is clean and properl...

2. Free A Stuck Auger Shaft - Z Grills Australia Knowledge Centre

  • If the auger is not rotating it may be due to the auger shaft being jammed, or a failed (burnt-out) auger motor. If the auger shaft is moving freely (see how to ...

  • This article covers how to free up a stuck or jammed auger shaft in a Z Grills pellet smoker.

3. Traeger Grill Troubleshooting: Quick & Easy Fixes (updated)

4. How Traeger Pellet Grills Work - Woodsmoked BBQ Grills

  • Traeger grills require standard household electric current (110 VAC), which powers the igniter rod, auger motor and draft induction fan. Once you turn the grill ...

  • Traeger Wood Pellet Grills the ultimate BBQ and smoker. Barbecue steaks and burgers, it's a fish and meat smoker Bake biscuits, pizza, & scones... all from your Traeger grill. Wood fired Barbecue, with authentic Gourmet flavours

5. [PDF] 4731 Ironwood_OM_ENv28.indd - grillbar-bq

  • If one or both are not operating, contact Traeger's VIP-365 Customer Service (see page 35) ... This error occurs when the controller does not detect the auger ...

6. [PDF] Traeger Tailgater Manual.pdf

  • Turn the Switch ON (--) and the Temperature/dial to smoke look into the Pellet. Hopper to confirm the Auger is turning. ... 4) If the Auger Drive Motor is not ...

7. Troubleshooting: Traeger Grill Won't Power On - Thirty-One Whiskey

  • 23 mei 2019 · If in either situation the fuse appears “tripped” (should see some black smoke residue inside the glass vial or other damage) then it needs to ...

  • I love my Lil’ Tex Traeger Grill. The thing is amazing, churning out delicious meaty meals time and time again. It’s getting on in years, and after this latest winter, it seemed like th…

8. How Pellet Grills Work & How To Troubleshoot Components

  • 29 feb 2024 · For example, on 'smoke' most Traeger grills will turn the auger for 15 seconds then turn it off for about 60 seconds. Auger motors often have a ...

  • How Pellet Grills Work A pellet grill, also known as a pellet smoker, is a type of outdoor cooking equipment that uses wood pellets as fuel to create smoke and heat for cooking food. They can be used for many different types of cooking: smoking, grilling, baking, roasting, barbecuing, and more. Pellet grills require an active power source such as home electricity, a portable power bank, or a car battery with a power inverter. This is necessary to power the electrical components inside the grill: controller, auger, fan, and igniter. When starting a pellet grill, the airflow fan will spin steadily and the auger will rotate for a short period of time to feed pellets to the firepot. The hotrod heats up, and after a couple of minutes the pellets will start to smoke and burn. About 10-20 minutes later, the grill will be up to temperature and ready to start cooking. Total ignition time is usually 10-15 minutes for 200F and below, up to about 20-25 minutes for 500F. Ignition takes longer in colder weather. The most common reason for performance issues with pellet grills are cleaning and maintenance. Even after just a few cooks, there will be noticeable food residue along the drip tray and grease channel which could catch flame if an ember falls in the wrong place. Over time creosote will also build up anywhere smoke touches inside the grill, especially the exhaust. As a general rule, before replacing any parts, it is best to clean any food and smoke residue from the interior and see...

9. Initial Start Up and Burn in Process for a Pellet Smoker - Saddleback BBQ

  • 9 jun 2020 · You will be able to hear a “whirring” sound when the auger motor is on. It will only rotate for a few seconds when your first turn the ...

  • The Z Grills Initial Startup and Burn-in process must be performed before your first cook on your new pellet smoker. Like any pellet smoker, your grill needs to be seasoned before you can use it. The whole process roughly takes about an hour to complete and you’ll need enough wood pellets to run the grill on HIGH for a

10. How to Start a Traeger Grill (with Pictures) - wikiHow

  • If your grill does not heat up or start to roar, there may be a problem with 1 of the component parts. Check your grill's hotrod, fan, and auger to see if there ...

  • Traeger is a brand of wood-burning grill popular among barbeque aficionados. Though the company offers a variety of different models, all Traeger grills use the same basic, easy to follow start up and shut down procedure. Assemble your...

11. “My Auger Stopped” | - Pellet Stove Pro

  • It shuts off your auger motor if your chimney gets full of ash. If you haven't cleaned your chimney in a year, this may be the cause of your auger not turning.

  • Posted on

Auger Not Turning On Traeger (2024)

FAQs

Why is my Traeger auger not turning? ›

Check if the auger is jammed

On a cool grill, remove the grates, drip pan and heat baffle so you can see the end of the auger tube. Grab hold of the end of the auger and try to turn it manually. If the auger won't spin, it's likely jammed with wet or clumped pellets.

Does the Traeger auger always turn? ›

It is normal for the auger to cycle on and off as it feeds pellets into the firepot. This means that the auger rotation is not continuous, but will pause.

How do I unclog the auger on a Traeger grill? ›

Locate the 4 screws holding the hopper assembly on the grill and remove them (2 on either side). Carefully remove the hopper assembly. Remove the 1/4-inch bushing screw (Screw holding the auger to the frame of the grill). With force, try to pull the auger motor back and forth by hand to try to loosen the jam.

How to prime the auger on a Traeger? ›

Priming an Auger on a Wi-Fi Connected Grill
  1. Add fresh pellets to the hopper.
  2. On the grill controller, navigate to Select Auger>Prime Auger.
  3. Once pellets begin to fall into the firepot, select Done to turn off the auger.
Jun 20, 2024

Why is my earth auger not turning? ›

If your engine runs but the auger doesn't turn, a problem with the drive train is the most likely situation. Frequently, the issue can be traced back to the flexible shaft core. The best way to determine if the flex shaft is the issue is to inspect the core end fittings for cracks or breakage.

Is it OK to leave pellets in Auger? ›

Emptying your hopper after each cook and storing the leftover pellets in a secure device like sealed bucket can ensure your pellets last as long as possible. It can also help prevent your auger from jamming. It is also extremely important to perform a “burnoff” after each cook to clear your Pit Boss auger as well.

Why does the auger keep stopping on my pellet stove? ›

Look into the hopper and see if you can see any obstruction stopping the auger from turning. The obstruction could be further into the feeder body but sometimes you can see something like a screw, nail or any other small foreign object.

How do you fix a stuck auger? ›

Try Dampening the Soil

Sometimes, when you're drilling through a harder surface or drier ground, your auger can get stuck. Pouring some water around the hole will allow the soil to loosen around the tool, giving you more wiggle room to slide it out.

How to purge auger Traeger? ›

Prime the auger to remove any remaining pellets that you did not vacuum out of the auger tube. Prime until no more pellets fall into the firepot. WiFIRE-enabled grills: On your controller, navigate to Select Auger > Prime Auger. Repeat until pellets no longer come out of the auger tube.

How long does Auger clearing take on Traeger? ›

The CLEAR AUGER function runs continuously until the user turns it off. Expect this process to take 15 or more minutes.

How do you clear a pellet auger? ›

How to Clear an Auger Jam Manually
  1. Remove the lower panel underneath the hopper. This allows access to Auger Motor.
  2. Remove the 4 bolts holding the Auger Motor to the grill frame.
  3. Loosen the small screw that locates the Auger bushing.
  4. Pull Auger, Motor, and Bushing out of the grill.
  5. Clean any debris from Auger.
Sep 5, 2023

How come my Traeger won't turn on? ›

Check to see if the power cord is securely connected to the power brick underneath the hopper. Look for damage to the power cord. If damaged, replace the power cord. If using an extension cord, plug the grill directly into the outlet to see if the extension cord is faulty.

Why is my ice dispenser auger not turning? ›

If the auger is not turning you should first verify the motor is operating. The motor/gear box normally makes enough noise that you can hear it with the freezer door closed. If the motor is not operating then you can check it for continuity with a multi-meter.

Top Articles
Latest Posts
Article information

Author: Sen. Emmett Berge

Last Updated:

Views: 6279

Rating: 5 / 5 (80 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Sen. Emmett Berge

Birthday: 1993-06-17

Address: 787 Elvis Divide, Port Brice, OH 24507-6802

Phone: +9779049645255

Job: Senior Healthcare Specialist

Hobby: Cycling, Model building, Kitesurfing, Origami, Lapidary, Dance, Basketball

Introduction: My name is Sen. Emmett Berge, I am a funny, vast, charming, courageous, enthusiastic, jolly, famous person who loves writing and wants to share my knowledge and understanding with you.